"REP Holding" produces a high-technology gas–pumping unit “Ladoga-32” for operating conditions of any degree of complexity, remarkable in its high efficiency (36 %), low emissions and prolonged service life.

REP Holding offers manufacture of GPA- 25 “Ladoga” for installation at compressor stations of the gas trunk-lines with operating pressure from 5.5 to 12.0 Mpa.

"REP Holding" offers to manufacture "Ladoga" series GPU-16 to be installed on the compressor stations of the main gas pipelines with the operating pressure from 5.5 to 12.0 MPa.

REP Holding develops and manufactures standardized gas-pumping units  based on gas-turbine engines  of various power ratings.

“REP Holding” produces in series EGPU rated at 4, 6.3 and 12.5 MW.
These units are designed for compression of natural gas at compressor
stations and its transmission via gas-main pipelines.

This group of units includes compressors of a new generation that differ from the previously developed in the availability of forged
barrel–type casings.

The 170-31-1С, 125-31-1С compressors are incorporated into the GPU-4RM-03 and GPU-4RM-03 and are designed for compression and movement of natural gas via the gas-main pipelines in the CS conditions with a high pressure.

The 151-21-1С compressor is incorporated into the GPA-4RM-01 and is designed for compression and movement of natural gas via the gas pipelines. The 151-21-1С compressor is unified with the 47- 71-1С compressor in its general concepts and the assemblies used.

The 385-21-1 compressor is part of the gas-pumping unit GTNR-16 and is designed to compress and transmit natural gas via gas main pipelines with a working pressure of 7.45 MPa.

Compressor 285-61-1СМП  is designed for compression and transportation of natural gas. It is applied in assembly with gas-pumping units at booster compressor stations of the gas producing industry.

Compressor 910-41-1СМП is designed for compression and transportation of associated gas. It is applied in assembly with gas-pumping units at booster compressor stations of the gas producing industry.

The 47-71-1S (47-71-1) compressor is included in GPU-4RM as part of GPU-4RM-02 and is designed for gas injection into the underground storage facility.

The replaceable flow paths (RFP) are designed for modernization of the of the life-expired and obsolete gas–pumping unit compressors, as well as in case of changes in the compressor station operating conditions.

The creation of the automatic control systems includes: draft design investigations at a site; development of Technical Assignments for creation of ACS taking into account individual requirements of Purchaser.